First electrically pumped perovskite polariton laser diode solves a decades-long challenge
Resolving a long-standing problem in semiconductor physics and optoelectronics, a team of researchers from Skoltech—a VEB.RF group institution—and their colleagues from ITMO University and HSE University have for the first time demonstrated direct electrical pumping of a polariton laser based on a solution-processed halide perovskite microcrystal. Published in Nature, this solution to a decades-long technological challenge ushers in inexpensive nonepitaxial laser diodes operating under continuous electric current. These could be used in optical sensing and spectroscopy, high-speed computing and energy-efficient neuromorphic computing.
Direct electrical injection in solution-processed semiconductors
Solution-processed semiconductors, including organic materials, quantum dots and metal halide perovskites, present a low-cost alternative to complex epitaxially grown crystals. However, creating electrically driven laser diodes from these materials has remained extraordinarily difficult. Under high current densities, traditional light-emitting diode architectures suffer from severe heat accumulation, which causes material degradation.
To overcome these obstacles, the Skoltech-led research team leveraged the unique physics of exciton-polaritons—the hybrid quasiparticles born from the strong coupling between light (photons) and bound electron-hole pairs (excitons) inside an optical microcavity. Thanks to their bosonic nature, polaritons can collapse into a single macroscopic quantum state—a Bose-Einstein condensate—and emit coherent laser light at significantly lower energy and charge densities than conventional semiconductor lasers.
The researchers integrated a solution-grown perovskite microplate with thin-film single-walled carbon nanotube electrodes inside a high-finesse optical microcavity. By implementing a specialized two-stage cryocooling protocol, the team controlled the spatial redistribution of mobile ions to form a stable, frozen p-i-n junction diode.
This frozen p-i-n diode facilitated efficient charge-carrier injection without destroying the perovskite crystal lattice. Under continuous direct electrical current, the device exhibited clear polariton lasing at a low threshold current of 60 microamperes.
"Achieving lasing under direct electrical pumping in solution-processed materials has been one of the key goals in semiconductor optoelectronics for 60 years," says Assistant Professor Anatoly Pushkarev of Skoltech Photonics, the lead author of the study.
"By combining chemically inert carbon nanotube electrodes and mobile halide vacancies of the perovskite lattice, we established a viable route to preventing unwanted reactions at the perovskite-electrode interface and overcoming the thermal bottleneck. Carrier injection in our device yields a highly localized electroluminescence center at the physical defect that we create near the end of a carbon nanotube bundle."
"This physical defect induces an attractive potential for free exciton-polaritons and yields trapped ones," adds Senior Research Scientist Stepan Baryshev of Skoltech Photonics, a contributing author of the article. "We clearly observed the three hallmarks of trapped exciton-polariton condensation, namely, the nonlinear increase in emission intensity, the narrowing of the spectral linewidth and a blueshift of lasing emission above the threshold current."
Transforming next-generation photonic technologies
Unlike conventional semiconductor laser diodes, which require complex and high-cost epitaxial growth techniques, solution-processed perovskite microcavities can be fabricated via straightforward chemistry. Furthermore, polariton lasers operate at excitation densities well below the Mott transition threshold, minimizing power consumption and heat generation.
The ability to directly drive light-matter condensates with electric current opens up concrete possibilities for real-world applications across multiple domains. These electrically driven devices can serve as low-power integrated optical interconnects for high-speed computing, function as compact on-chip coherent light sources for optical sensing and spectroscopy, and enable energy-efficient polariton-based neuromorphic computing and optical logic circuits.
"This work provides a blueprint for engineering a new class of solution-processed, electrically driven coherent light sources," comments Distinguished Professor Pavlos Lagoudakis, the principal investigator of the study and head of the Laboratory of Hybrid Photonics at Skoltech Photonics. "It bridges fundamental polariton physics with practical optoelectronic device engineering, paving the way toward real-world applications for polariton lasers."
Publication details
Anatoly P. Pushkarev et al, Non-epitaxial perovskite polariton laser diode operating under direct current, Nature (2026). DOI: 10.1038/s41586-026-10824-w
Who's behind this story?
BA art history, MA material culture. Former museum editor, paramedic, and transplant coordinator. Editing for Science X since 2021. Full profile →
Bachelor's in mathematical biology, Master's in creative writing. Well-traveled with unique perspectives on science and language. Full profile →
Citation: First electrically pumped perovskite polariton laser diode solves a decades-long challenge (2026, July 29) retrieved 29 July 2026 from https://phys.org/news/2026-07-electrically-perovskite-polariton-laser-diode.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.